Impulse UNO-1172AH User Manual download pdf

Embedded Automation Computers

Features

UNO-1172AH

Class I, Division 2 Certiﬁed Intel

Atom

™

D510 DIN-rail PC with 3 x LAN, 2 x COM,

VGA, Mini-PCIe

Speciﬁcations

General

 Certiﬁcation CE, FCC Class A, UL, CCC

 Hazardous Locations US: ANSI/ISA 12.12.01-2007 cUL: CSA 22.2 No. 213 M1987,

Class I, Division 2, Groups A,B,C,D, Hazardous Location,

Temperature code: T5, Ambient Temperature Range: -10°C ≤

amb

≤ 60°C

 Dimension (W x H x D) UNO-1172AH: 85 x 152 x 139 mm (3.4" x 6"x 5.5")

Enclosure Aluminum + SECC

 Mounting DIN-rail, Wallmount

 Power Consumption 24 W (Typical)

 Power Requirement 9 (Min.) ~ 36 (Max.) V

(e.g +24 V @ 2 A) (Min. 48 W), AT/

ATX power mode by Jumper selection and BIOS AT simulation

(support system reboot automatically after power recovery)

 Weight UNO-1172AH: 1.6 KG

 OS Support WES Windows XP Embedded, Windows XP & Windows 7,

Windows CE 6.0, Linux, QNX

 System Design Fanless design with no internal cabling

 Remote Management Built-in Advantech DiagAnywhere agent on Windows CE / XPe

System Hardware

 CPU Atom D510 1.67GHz

 Memory 2GB DDR2 SDRAM built-in

 Battery Backup SRAM 1 MB

 Indicators System:LEDs for Power, CF, LAN (Active, Status), Serial

(Tx, Rx), Diagnosis /Alarm: over system temperature, over

voltage, alarm for battery backup SRAM, alarm for RTC

battery,Programmable(while disable Serial Tx&Rx), Buzzer for

Diagnosis (programmable)

 Keyboard/Mouse 1 x PS/2

 Storage SSD: 1 x internal type I/II CompactFlash slot

HDD: one 2.5" SATA HDD bracket

 Display DB15 VGA connector, 1600x1200 @ 85 Hz

 Audio 5.1 channel HD Audio, Mic in, Line in, Line out

 Watchdog Timer Programmable 256 levels timer interval, from 1 to 255 sec

 Mini-PCIe 1x PCI express mini card slot

I/O Interface

 Serial Ports 2 x RS-232/422/485 with DB9 connectors,Automatic RS-485

data ﬂow control

2x RS-232 (Optional, pin header)

 Serial Port Speed RS-232: 50 ~ 115.2 kbps

RS-422/485: 50 ~ 115.2 kbps (Max)

 LAN 3 x 10/100/1000 Base-T RJ-45 ports (supports Wake on LAN,

Teaming, built-in boot ROM, and IEEE1588 hardware support)

 USB 4 x USB, EHCI, Rev. 2.0 compliant

 Digital Output 8-ch DO- 200 mA max/channel sink current

- Keep output status after system hot reset

- 5 ~ 40 V

output range and 10 kHz speed

 System Diagnoses Output: over system temperature, over voltage, battery power

fail, power status

Input: Power On/Off, Reset

Environment

 Ingress Protection IP40

 Operating Temperature (IEC 60068-2-2, 100% CPU/ I/O loading)

-10 ~ 65°C (-4 ~ 149°F)

 Storage Temperature -20 ~ 80°C (-4 ~ 176°F)

 Operating Humidity 20 ~ 95% (non-condensing)

 Storage Humidity 0 ~ 95% (non-condensing)

 Shock Protection IEC 60068- 2-27

CompactFlash: 50 G @ wall mount, half sine, 11 ms

HDD: 20 G @ wall mount, half sine, 11 ms

 Vibration Protection IEC 60068- 2-64 (Random 1 Oct./min, 1hr/axis.)

CompactFlash: 2 Grms @ 5 ~ 500 Hz,

HDD: 1 Grms @ 5 ~ 500 Hz

Ordering Information

 UNO-1172AH-A33E CID2 Atom D510 1.67GHz, 2GB RAM DIN-rail PC

Accessories

 UNO-FPM11-BE UNO-1100 Series VESA Mount Kit

 PCLS-DIAGAW10 Advantech Remote Monitoring & Diagnosis Utility

 UL listed for Hazardous Locations: Class I, Division 2

 Onboard Intel

Atom D510 1.67GHz

 Onboard 1 MB battery-backup SRAM

 System diagnosis through led and digital output, remote power control

through digital input

 Two RS-232/422/485 ports with automatic ﬂow control

 Three 10/100/1000 Base-T RJ-45 ports with teaming function support

 4 x external USB

 PC/104+ expansion slots option

 1 x Mini-PCIe slot for WLAN card and Fieldbus card

 Windows 7, Windows CE, XP Embedded and Linux support

 Fanless design with no internal cabling

 Isolation between chassis and power ground

Introduction

In hazardous locations, devices are under potential danger from ﬂammable gases, combustible dust, or ignitable ﬁbers, creating the potential for ﬁre and explosions. UNO-1172AH

are designed to be safely operated in these locations and are UL listed for Hazardous Locations with Class I, Division 2, groups A, B, C, D & T5 certiﬁcation. The UNO-1172AH is

an Intel Atom DIN-rail PC which features an innovative system diagnosis feature for automation applications. They provide alarms for over temperature, over voltage, battery power

fail, power status on both system onboard LED and Digital output. They also include remote power control through digital input. These system diagnosis features enable control

and monitoring of system status remotely. Three Gigabit Ethernet interfaces with teaming function support allow users to uplink two ports with data transmission fault tolerance and

downlink one port to ﬁeld device.

UNO-1172AH

NEW

RoHS

COMPLIANT

2002/95/EC

UNO-1172AH 1

Summary of Contents

Page 1 - UNO-1172AH

Embedded Automation ComputersFeaturesUNO-1172AH Class I, Division 2 Certiﬁed Intel® Atom™ D510 DIN-rail PC with 3 x LAN, 2 x COM, VGA, Mini-PCIe Spec

Comments to this Manuals

No comments

Impulse UNO-1172AH User Manual

Browse online or download User Manual for Hardware Impulse UNO-1172AH. Impulse UNO-1172AH User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware Impulse UNO-1172AH