Impulse 463N User Manual download pdf (Page 60)

©Sealevel Systems, Inc.

SL9049 - 11/2010

SeaI/O Manual

You must now change the IP Address of your wireless adapter to match the subnet (first 3

octets) of the wireless SeaI/O module listed in Ethernet Config.

You can change your wireless adapter's IP Address by going to the Properties dialog for your

wireless adapter (Start  Settings  Network Connections). Right-click on your network adapter

and then select Properties from the menu. This opens the Wireless Network Connection

Properties window.

On the General tab, select „Internet Protocol (TCP/IP)‟, leave the box checked, and then click the

Properties button.

Before you change any settings in the following window, make a note of your original

settings. You will need to revert back to your original wireless adapter settings once you

have successfully configured the wireless SeaI/O module to work with your network.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 108 109

No comments

Impulse 463N User Manual Page 60