Impulse 520W User Manual download pdf (Page 70)

SeaI/O-463 50-Pin Header Connectors

The SeaI/O-463’s 96 digital I/O channels are accessed via four industry-standard 50-

pin header connectors. Each header provides 24 bits of digital I/O divided into three

eight-bit ports. Each port may be individually configured via software command as

an input or an output.

You will need to open the SeaI/O-463’s enclosure to access the four header

connectors: P2, P3, P4, and P5. The connector designators are silk-screened onto the

PCB for easy identification. Once cables are connected to the headers, route them

through the opening in the front of the enclosure, attach the included strain-relief

bracket to secure the cables and reassemble the enclosure. Refer to the ribbon cable

installation instructions included with the SeaI/O-463.

Each of the four 50-pin connectors has the following pinout, which is compatible

with a wide variety of industry-standard solid-state relay racks:

- 67 -

SeaI/O User Manual

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 83 84

No comments

Impulse 520W User Manual Page 70