Impulse 7201 User Manual download pdf (Page 6)

Card Setup

Sealevel Systems ULTRA COMM+2.PCI Page 3

Figure 3 - Headers J1B and J2B, RS-485 ‘Auto’ Enabled, with ‘Echo’

Figure 4 - Headers J1B and J2B, RS-485 ‘RTS’ Enabled, with ‘No Echo’

Figure 5 - Headers J1B and J2B, RS-485 ‘RTS’ Enabled, with ‘Echo’

Address and IRQ selection

The ULTRA COMM+2.PCI is automatically assigned I/O addresses and IRQs by your motherboard BIOS. Only

the I/O address may be modified by the user.

Adding or removing other hardware may change the assignment of I/O addresses and IRQs.

1 2 3 4 5 6 7 8 9 10 11 ... 22 23

No comments

Impulse 7201 User Manual Page 6