Impulse MAQ20-940 Quick Start Guide User Manual

MAQ®20 Industrial Data Acquisition and Control System Quick Start Guide

MAQ®20 Quick Start Guide 6 Figure 4: MAQ20 Configuration Software Tool Window, View Pane Enabled Once communications have been established, the MAQ®

MAQ®20 Quick Start Guide 7 3.3.2 Configuring the MAQ20 Voltage Input Modules To access the configuration and perform basic operations for the Voltage

MAQ®20 Quick Start Guide 8 3.3.3 Configuring the MAQ20 Voltage Output Module To access the configuration and perform basic operations for the Voltage

MAQ®20 Quick Start Guide 9 3.3.4 Configuring the MAQ20 Discrete Input/Output Module To access the configuration and perform basic operations for the

MAQ®20 Quick Start Guide 10 4.0 ReDAQ® Shape for MAQ®20 Installation and Operation Download the ReDAQ® Shape for MAQ®20 Developer version User vers

MAQ®20 Quick Start Guide 11 If the system is connected via Ethernet, ensure the TCP/IP Port radio button is selected. For initial connection leave t

MAQ®20 Quick Start Guide 12 5.0 Configuring the Host Computer Ethernet Port for a Static IP Address Go to Control Panel and click on Network Connect

MAQ®20 Quick Start Guide 13 Select Internet Protocol (TCP/IP) and then click on Properties. Select Use the following IP Address and input the IP add

MAQ®20 Quick Start Guide 14 Test the connection by using the ping command. Open a Command Prompt window, type ping 192.168.128.100, and hit Enter.

MAQ®20 Quick Start Guide 15 DATAFORTH WARRANTY Applying to Products Sold by Dataforth Corporation a. General. Dataforth Corporation (“Dataforth

MAQ®20 Quick Start Guide ii MAQ®20 Industrial Data Acquisition and Control System Quick Start Guide MA1036 Rev. B

MAQ®20 Quick Start Guide 16 (4) DATAFORTH’S LIABILITY ARISING OUT OF THE PRODUCTION, SALE OR SUPPLY OF PRODUCTS OR THEIR USE OR DISPOS

MAQ20®Quick Start Guide 17 Application Support Dataforth provides timely, high-quality product support. Call 1-800-444-7644 TOLL-FREE. Returns/Rep

MAQ®20 Quick Start Guide iii Table of Contents 1.0 Unpacking ...

MAQ®20 Quick Start Guide iv About Dataforth Corporation “Our passion at Dataforth Corporation is designing, manufacturing, and marketing the best po

MAQ20®Quick Start Guide 1 1.0 Unpacking Each MAQ®20 Data Acquisition System is shipped in electro-static discharge (ESD) protective packaging. Us

MAQ®20 Quick Start Guide 2 3.0 Verifying Basic Operation The steps required to verify basic operation are: 1. Install system software and USB d

MAQ®20 Quick Start Guide 3 3.1 Minimum Host Computer Requirements The host computer must be running the Windows 2000, Windows XP, Windows Vista or

MAQ®20 Quick Start Guide 4 3.3.1 Establishing Communication with the MAQ®20 System IMPORTANT: If the MAQ®20 system is to be used with a USB connect

MAQ®20 Quick Start Guide 5 From the Communication pull-down menu, select Configure. The Communication Setup window will appear giving the user the ab