Impulse SIO4-104.2+2 (3544) User Manual download pdf (Page 10)

- 8 -

SIO4-104.2+2 User Manual

Physical Installation

Extreme care should be taken when installing the SIO4-104.2+2 to avoid causing damage to the

connectors. After the adapter is installed, connect your I/O cable to P4.. Refer to Card Setup for

information on setting the address and jumper options before inserting the SIO4-104.2+2 onto the

stack.

Do not install the Adapter in the machine until the software has been fully installed.

1. Turn off power. Disconnect the power cord.

2. Gently insert the SIO4-104.2+2 connector noting proper key orientation of the

expansion connector on a PC/104 compatible card. The SIO4-104.2+2 adapter is

keyed per the current PC/104 Specification. This will aid in preventing the adapter

from being inserted incorrectly.

3. Mounting hardware (nylon stand-offs and screws) is provided to ensure a good

mechanical connection. Retain any mounting hardware not used to allow for future

expansion.

4. Replace the cover.

5. Connect the power cord and power up the machine.

The SIO4-104.2+2 is now ready for use.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

No comments

Impulse SIO4-104.2+2 (3544) User Manual Page 10